| |
August Product Preview
Please note some of the products on this page are only prototypes and the finish is not upto the standard of the final product
X2O Delta CPU
Building on the X2O Xtreme block the X2O Delta pushes the performance even further.
- Improved finish and aesthetics
- Increased pin count
- Designed for Quad and Dual core processors
Release date: 15th August
RRP £28.99
X2O Chipset V2
We have revised the X2O chipset to improve compatibility and performance
- New higher performance copper base
- Added hook loop chipset mount
Release date: 14th August
RRP £18.99
|
 |
Dual 5.25" Bay Reservoir
Instead of releasing a standard dual bay reservoir we wanted to do something a little different. The bubble window on the front is perfect for showing off UV reactive dyes and with 3 LED holes you can really make it glow.
- Glossy Black acrylic front
- Three LED holes
- Looks great with UV dyes
- Supplied with 1 blue LED
- UV, Red and Green LED's sold separately
Release date: 10th August
RRP £21.99
|
 |
Single 5.25" Bay Reservoir Pump
The single bay reservoir with pump is perfect for a compact watercooling system or a second loop.
- Low noise and low vibration
- Pump can run at 50% water level
- 1.2m head 200lph
- 12V motherboard header with rpm readout
Release date: 10th August
RRP £24.99
|
 |
Laing DDC Top
After many delays our Laing DDC top is finaly here.
- High quality acrlyic
- Two LED holes
- Excellent performance
Release date: 14th August
RRP £10.99
A big thanks to the guys over at Overclock3d for testing our DDC top. After our own internal testing we narrowed it down to two design (XSPC#1 and XSPC#3) these were sent to overclock3d for further testing. You can see the results below
|
 |
Max flow test
Alphacool Plexi top with top inlet configuration
Petra’s Tech Shop DDC-01s
OCLabs Plexi
XSPC#1 Top
XSPC#3 Top
Swiftech MCP600
Note: XSPC#3 is our final design
Max head test
The mock water loop consisted of:
· Swiftech Storm G4 rev2 cpu block
· Swiftech MCW60 gpu block
· 1 x single 5.25” bay reservoir
· 1 x Toyota Camry heater-core (radiator)
· 1/2” ID XSPC tubing
keep an eye on Overclock3D.net for a full review of the production version.
We are also releasing a stand for the DDC pump on the 14th August. More info soon
If you have any question about our new range please contact us.
|
|